UPSB v4
Tutorials Pending Approval / XLNint Mod
-
Date: Wed, Jul 14 2010 21:25:32
Hi everyone! I just created this mod a few days ago and I have to say, I'm really satisfied with this pen. It spins really smoothly. This is my first time posting so please go easy on me! Here's what it looks like: http://s966.photobucket.com/albums/ae142/lecnlc15/?action=view¤t=DSCN0071.jpg Another Picture With Grips: http://s966.photobucket.com/albums/ae142/lecnlc15/?action=view¤t=DSCN0072.jpg Stats: ----------------------------------------- XLNint Mod COG: Center Length: 21.5 CM Weight: Cheat Comssa
2. Gather two Signo tips or any subs and stack them on top of each other. Repeat this process twice. 
3. Cut two pieces of electrical tape each about 5 cm long.
4. Wrap the tape around the tips and the cap. Make sure the base/bottom of the tip is NOT fully covered. Do the same for the other side.
5. Cut two R.S.V.P. caps between the two bumps of the cap. See those circle things? Cut the circle in half. They should be both about 2.8 cm long.
6. Slip the caps on the caps. The caps should fit on snug.
7. Attach a Dong-A back plug onto the back of the barrel.
8. Attach the caps to each end of the barrel... And there you go! You have just created your very own XLNint Mod!
9. *Optional: Add grips to the caps.
--------------------------------------------
Q & A
Q: My RSVP caps keep flying out, what should I do?
A: Add more tape to the Dong-A Cap.
Q: What should I do to prevent Signo tips from fly out?
A: They shouldn't. The bulge in the RSVP cap should stop it. If it doesn't tighten the tape.
Q: The Dong-A caps fall off really easily, is that normal?
A: Yes, add some clear tape to secure it.
---------------------------------------------
Video:
[video=youtube;E5ilmmdhXDI]http://www.youtube.com/watch?v=E5ilmmdhXDI[/video]
--------------------------------------------- -
Date: Wed, Jul 14 2010 22:11:36
mhh really looks like a Buster version of Vicgotgame´s mod without using airfits^^
-
Date: Wed, Jul 14 2010 23:02:38
Well... yeah. Originally, I was going to use g3 caps but they were too expensive. The whole idea of this mod is just basically a hybrid of many mods I guess. (ex: cheat comssa, buster, vicgotgame mod, etc.)
-
Date: Wed, Jul 14 2010 23:40:06
first off I dont think youcan really call a mod your own creation if its just a hybrid of other mods. second it doesnt look very clean. maybe offer a way to cover upthe visible tape on the comssa caps. lastly just sticking a comssa cap on the end of a supertip isnt a very stable way of holding them. plus you need to specify what kind of supertip this is because comssa caps do not o over the old version iirc
-
Date: Thu, Jul 15 2010 00:51:00
Sorry, I am not very good at tutorials. I don't know why but all my peers at school say to use tape. If there are any more suggestions, please tell me.
-
Date: Sat, Jul 17 2010 17:04:35
hmmm i think using a G3 cap would be much better and make it like somsak.
-
Date: Sat, Jul 17 2010 17:24:11
You didn't make a new mod, you made a signo tipped buster^2
-
Date: Sun, Jul 18 2010 07:23:34
u got the new and old st bodies mixed up http://www.upsb.info/forum/index.php?showtopic=21102
-
Date: Sun, Jul 18 2010 07:33:27
this is nothing more than a double signo tipped buster variation
-
Date: Tue, Jul 20 2010 18:51:18
It looks pretty good. Could you replace the rsvp caps with dr. grip grips or airfit grips? Cutting rsvp caps, in my opinion, is a pain
-
Date: Tue, Jul 20 2010 19:04:07
well then you would be sliding the grips over tape and the tape might bend back and still it owuld look unclean imo.
-
Date: Mon, Nov 28 2011 01:11:56
can you sub teh supertip with a bellcolor? I leik colors :)