UPSB v4
Pen Modifications / Needs help making a straight cut on bodies and grips
-
Date: Sun, Jul 10 2011 01:06:53
Everytime i try cutting a body or grip its always like slanted or just plain out crappy. Any tips on it Plz. i try cutting bodies. Then i try to put them together but it is not smooth. it gets uncomfortable when i spin it. Plzzz help. When i cut grips like anyballs i can never get a perfect cut helpp too
-
Date: Sun, Jul 10 2011 01:11:32
Minlaotion wrote: Everytime i try cutting a body or grip its always like slanted or just plain out crappy. Any tips on it Plz. i try cutting bodies. Then i try to put them together but it is not smooth. it gets uncomfortable when i spin it. Plzzz help. When i cut grips like anyballs i can never get a perfect cut helpp too
flatten it out a bit use a sharp knife -
Date: Sun, Jul 10 2011 01:21:23
For bodies, i always cut it slanted but i will try to sand them down until straight
-
Date: Sun, Jul 10 2011 01:36:36
just use ninja skillz.
-
Date: Sun, Jul 10 2011 01:39:39
I use a tube cutter for soft body barrels. Another thing that I noticed is that you need a hard piece of sandpaper or file, otherwise you might apply too much pressure on one side while sanding and end up with an uneven barrel. Guitrum's grip cutting tutorial http://www.youtube.com/watch?v=NQAkGEJXOJQ
-
Date: Sun, Jul 10 2011 01:52:09
if u cut barrel , after cut sand it .. if u cut grip , put the grip on any barrel but some tape on both side and cut it
-
Date: Sun, Jul 10 2011 02:02:13
exclusive wrote: flatten it out a bit use a sharp knife
Thnx it worked :D -
Date: Sun, Jul 10 2011 02:14:27
Minlaotion wrote: Thnx it worked :D
np -
Date: Sun, Jul 10 2011 02:19:05
use an x-acto knife
-
Date: Sun, Jul 10 2011 02:25:06
For bodies, I use a veerrryyy sharp steak knife and file it afterwards For grips, I use an Xacto knife
-
Date: Sun, Jul 10 2011 04:15:05
RicLu98 wrote: use an x-acto knife
I dont have one XD -
Date: Sun, Jul 10 2011 04:23:39
Whenever you cut a body always cut ~ 1.5 cm more than necessary. After that, sand it down. For grips flatten it and cut straight down. :)
-
Date: Sun, Jul 10 2011 08:02:48
if you're serious about modding, go get the needed tools.. x-acto knife, mini tube cutters, sanding paper are always needed to create the cleanest cuts if you're not serious about modding, then it wont matter anyways >_>|| PrinceXD
-
Date: Sun, Jul 10 2011 14:59:58
PrinceXD wrote: if you're serious about modding, go get the needed tools.. x-acto knife, mini tube cutters, sanding paper are always needed to create the cleanest cuts if you're not serious about modding, then it wont matter anyways >_>|| PrinceXD
My parents would go crazy if i bought those XD -
Date: Sun, Jul 17 2011 23:15:48
Minlaotion wrote: My parents would go crazy if i bought those XD
that is just the same as my rents ;)