UPSB v4
Tutorials Pending Approval / SEVEN G3 Mod Tutorial
-
Date: Tue, Mar 8 2011 23:57:33
SEVEN G3 Mod =========================== Stats: SEVEN G3 COG: COP Length: 20 cm Weight: 14 g Style: Single Sided, Non-Retractable Writing-Mechanism: N/A Ink-Type: N/A Estimated-Cost: ~$22 ===========================
===========================
Materials List:
1 x G3 Plastic Body and Tip
1 x Jimnie Cap
1 x Lakubo Grip
1 x Hyper Jell Grip
1 x Signo Grip
2 x Anyball/Profile Grip
1 x HGG Grip
1 x Metallic Gel Tip
1 x Needle-Point Tip
1 x Signo Tip
1 x Pastel Color Grip
===========================
Here is an original tutorial from Ponkotu's blog: http://annkou2.blog105.fc2.com/blog-entry-331.html
===========================
Tutorial:
===========================
[SPOILER="Tutorial"]
Gather your materials
Disassemble all the pens, and keep the following tips and grips:
G3 Body and Plastic Tip, Jimnie Cap, Lakubo Grip, Hyper Jell Grip, Signo Grip and Tip, Anyball/Profile Grip, HGG Grip, Metallic Gel Tip, Pastel Color Grip, and the Needle-Point Tip.
1. Cut and shave the clip of the Jimnie cap so that it is completely smooth
2. Cut 2 mm of the HGG Grip and stuff it into the Jimnie Cap.
3. Signo Tip is put into the Jimnie Cap
4. Cut 2.6 cm of the Hyper Jell grip and 3 mm of one Anyball/Profile grip
5. Stuff the cut Anyball grip into the cut Hyper Jell grip
6. Add an insert if desired around the Hyper Jell grip, and stuff it into the Jimnie cap
7. Cut 2 mm of the Pastel Color Grip and put it into the Jimnie cap after the Hyper Jell
8. Remove the G3 grip, Slice down with a blade, and poke out back plug with BBQ skewer. File down the nubs on the front of the G3. Cut 6 mm of the Signo grip and place it on the G3 Body.
9. Cut 3.5 of a second Anyball/Profile grip, unscrew the plastic tip of the G3, and stuff it INTO the Plastic G3
10. Screw on the plastic tip of the G3 firmly after you are done stuffing the Anyball grip in. Wrap some tape around the pen point to ensure it. Cut off any unnecessary tape using scissors
11. Put the Metallic Gel Tip over the Plastic G3 tip
12. After that, put the Needle-Point tip over the Metallic Gel Tip. Wrap a piece of tape near the point where the Needlepoint tip and the Metallic Gel Tip intersect to ensure the Needle-Point tip won’t fall off
13. Slide the Lakubo grip onto the Plastic G3
14. Add some tape around the end of the G3 Body so that the Jimnie cap stays on securely. Use the right amount to keep it on whilst avoiding cap cloud.
Add an insert of your choice and spin!
[/SPOILER]
===========================
Q/A:
Q: How can I cut my cap clip?
A: You could use some sort of hacksaw, then an X-Acto to clear the leftovers, and then sand it, or wire cutters work.
Q: Where can I get that insert?
A: 
============================
I really like this mod; it has a great weight/length and a lot of momentum!
Thanks for reading, and I hope you will all enjoy this mod and tutorial! -
Date: Wed, Mar 9 2011 00:06:21
Pictures are broken for me...I cannot view the images @Jacob8185
-
Date: Wed, Mar 9 2011 00:07:19
Thanks but pictures are broken...
-
Date: Wed, Mar 9 2011 00:36:40
trying to fix this issue; sorry about it I accidentally submitted it before I rechecked it :(
-
Date: Wed, Mar 9 2011 01:37:16
Is this the mod you were talking to me about?
-
Date: Wed, Mar 9 2011 01:44:41
M-B-W wrote: Is this the mod you were talking to me about?
not really... -
Date: Wed, Mar 9 2011 01:45:13
M-B-W wrote: Is this the mod you were talking to me about?
are the pictures still broken? -
Date: Wed, Mar 9 2011 01:52:33
Yes. They are still with ? sign.
-
Date: Wed, Mar 9 2011 02:10:35
due to the fact that my [img] s aren't working, I will simply put up urls until the images do work. sorry about that :(
-
Date: Wed, Mar 9 2011 03:03:55
@Jacob8185: Did you read the posting permissions at the bottom of the page? It says (for me, at least): Posting Permissions You may post new threads You may post replies [B]You may not post attachments[/B] You may edit your posts ...
-
Date: Wed, Mar 9 2011 03:05:42
I can post attachments
-
Date: Wed, Mar 9 2011 04:25:36
which part of the insert did SEVEN used inside the cap? I was told by a HKPSA dude that there is a specific section.. but he didnt wanna share (fkin attention whores) PrinceXD
-
Date: Wed, Mar 9 2011 05:22:10
PrinceXD wrote: which part of the insert did SEVEN used inside the cap? I was told by a HKPSA dude that there is a specific section.. but he didnt wanna share (fkin attention whores) PrinceXD
It's the same insert as the body. Just print two copies, and cut the second one until it fits. -
Date: Wed, Mar 9 2011 05:47:26
Yea, but he asked what portion.
-
Date: Wed, Mar 9 2011 05:47:56
I thought it was just the right side of the insert, cropped out to fit ?
-
Date: Wed, Mar 9 2011 05:58:34
I tried matching with TEK's replicas but I just cant see which part it is. I'm currently using the right side of the insert.. sadly attention seekers doesnt agree, and I just want to make sure. PrinceXD
-
Date: Wed, Mar 9 2011 23:36:07
PrinceXD wrote: I tried matching with TEK's replicas but I just cant see which part it is. I'm currently using the right side of the insert.. sadly attention seekers doesnt agree, and I just want to make sure. PrinceXD
right. If you see Ponkuto's tutorial on youtube, he simply just added the right side of the seven insert. To see it yourself, just go search "SEVEN G3 Mod" and click the first one. -
Date: Thu, Mar 10 2011 00:57:59
@Jacob8185 on the right side of the picture when you click the link, theres a box with different links. One says direct link; use that link and wrap [img] tags around it for it to work.
-
Date: Thu, Mar 10 2011 01:58:19
fixed the picture issue. Thanks, @Wonder
-
Date: Sat, Mar 12 2011 20:28:54
No! It must be Lacknock grip, not lakubo
-
Date: Sun, Mar 13 2011 12:00:34
any sub for pastel color grip?
-
Date: Mon, Mar 21 2011 17:27:32
Here a video tutorial of the Seven Mod By Ponkotu [video=youtube;JZhHwwoRuZc]http://www.youtube.com/watch?v=JZhHwwoRuZc[/video]
-
Date: Wed, Mar 30 2011 22:03:35
You can use the Signo grip which you use on the G-3 barrel. It's same as the Pastel color grip. I've done it with the Signo Grip and it fits perfectly
-
Date: Wed, Apr 6 2011 07:52:31
You can use a white *Signo Broad* sub for Pastel Color
-
Date: Wed, Apr 6 2011 07:53:22
Yeap... isint it obvious...
-
Date: Sun, Apr 17 2011 19:21:29
Alright... so for the substitutes: G3 plastic tip - Sailor Gel tip Jimnie cap: Hyper Jell cap Lakubo grip - Signo RT grip Needlepoint tip - Metal Signo tip Metallic Gel tip - Plastic Signo Tip, Sailor gel tip HGG Grip - RSVP Grip I may be wrong on some subs, so correct me if I am wrong in any way. Hope this helps!
-
Date: Sat, Apr 23 2011 02:35:39
wait so...can i sand down the Hyper Jell nub on the cap to make it go away, like a jimnie cap?
-
Date: Sat, Apr 23 2011 20:10:09
This mod looks sweet but is a mettalic gel tip that black plastic looking thing?
-
Date: Sat, Apr 23 2011 21:44:26
@Noodles yeah but its better to cut n shave use wire cutters n x acto
-
Date: Sat, Apr 23 2011 22:25:46
@Kiiro Yup; you don't really need to worry about what color it is, it will be covered by the lakubo and the needlepoint tip anyways. But if you don't want to buy it from penwish, the subs are above in my previous post. You can sub the metallic gel tip with a PLASTIC signo tip. It doesn't really matter what color it is anyways.
-
Date: Sun, Apr 24 2011 05:24:25
@Jacob8185 yeah i probably worded that badly i was wondering if its heavy or not
-
Date: Sun, Apr 24 2011 18:29:25
@Kiiro Yeah... you kind of did... The Metallic Gel tip is actually the weight of a plastic signo tip, which if you don't know, weighs around less than an hgg tip (Correct me if I am wrong)
-
Date: Sun, May 1 2011 02:45:35
Thanks:D
-
Date: Fri, May 6 2011 00:29:43
does SEVEN still spin? i haven't seen vids from him if he did i probably didnt know cuz i joined this year
-
Date: Fri, May 6 2011 00:31:50
SEVEN used to spin, and he got champion for JEB's competition. Now, I don't think that he is so active anymore.
-
Date: Fri, May 6 2011 00:32:33
@Noodles just found out, thought i should tell you. doing the hyperjell clip cut complete makes the cap REEAALLYYY fragile. i got a package from someone who did that and the cap came broken i really dont recommended it. just stick with a diamond cut if you plan to do that.
-
Date: Fri, May 6 2011 00:42:54
Kiiro;91229]does SEVEN still spin? i haven't seen vids from him if he did i probably didnt know cuz i joined this year[/QUOTE] [QUOTE=Jacob8185;91230]SEVEN used to spin, and he got champion for JEB's competition. Now, I don't think that he is so active anymore.[/QUOTE] he does http://forum.upsb.info/showthread.php?t=5330 edit: [QUOTE=Cloud wrote: @Noodles just found out, thought i should tell you. doing the hyperjell clip cut complete makes the cap REEAALLYYY fragile. i got a package from someone who did that and the cap came broken i really dont recommended it. just stick with a diamond cut if you plan to do that.
when i moded my kuzu i had to the clip off and it broke the cap in half T.T had to use my back up one. -
Date: Fri, May 6 2011 00:53:27
Cloud wrote: @Noodles just found out, thought i should tell you. doing the hyperjell clip cut complete makes the cap REEAALLYYY fragile. i got a package from someone who did that and the cap came broken i really dont recommended it. just stick with a diamond cut if you plan to do that.
thanks cloud!! good thing i haven't started gathering parts to make one yet, wouldve been sad if the cap broke n i didnt know why =] -
Date: Mon, Jun 6 2011 14:18:09
i love this mod, looks and spins amazingly
-
Date: Mon, Jun 6 2011 18:48:12
I completely removed the clip on 2 HyperJell caps and they didn't break even after 100 drops o_o
-
Date: Fri, Jun 10 2011 07:32:30
hope i got all the original part-.- i only have about 90% original..
-
Date: Sat, Jun 11 2011 17:34:58
seven!
-
Date: Fri, Jul 22 2011 14:29:21
where can i get the blue version of the insert? Can profile grip be sub for HGG grip?
-
Date: Sat, Jul 23 2011 23:17:01
linli07 wrote: where can i get the blue version of the insert? Can profile grip be sub for HGG grip?
http://forum.upsb.info/attachment.php?attachmentid=562&d=1311462803 http://forum.upsb.info/attachment.php?attachmentid=563&d=1311462819 Is that good? to awnser your question. I think if you use HGG in the cap it's ok, I think you won't have problems during spinning.;) -
Date: Sun, Jul 24 2011 20:08:00
@Zowie cause i have a lot of profile grips at my house i was wondering if it can be a sub for hgg grip. Then it'll save money if i order from penwish.
-
Date: Sun, Jul 24 2011 20:17:17
if you are very skilled it can be but it's VERY tight so it's hard to get the whole tip down and the grip in place still
-
Date: Sun, Jul 24 2011 21:46:58
Yeah it's not worth the headache and effort imo >_>
-
Date: Mon, Nov 28 2011 21:13:21
any sub for needelpoint, none left on penwish :(
-
Date: Mon, Jan 2 2012 19:23:44
@jabog you can try signo tip, but the weight will be different
-
Date: Wed, Jan 4 2012 02:04:21
for those that believe signo is a perfect sub of needlepoint, gg. signos are much much heavier than needlepoint, and the shape doesnt even resemble needlepoint. use a g3 or g1 tip instead. as for metallic gel tip, use a plastic g3 or super grip mech pencil plastic tip. Frog~
-
Date: Fri, Jan 6 2012 18:17:40
This is seriously COG:COP? O_o I don't understand how a single Needlepoint tip would balance out a Signo + Jimnie cap in the back
-
Date: Fri, Jan 6 2012 18:54:02
@Chobi The Needlepoint tip is farther from the COP than the Signo+Jimnie Cap. Besides Lakubo is a heavy grip.
-
Date: Sat, Jan 7 2012 04:17:32
Hence this mod haz a very weird weight distribution to it... Frog~
Chobi wrote: This is seriously COG:COP? O_o I don't understand how a single Needlepoint tip would balance out a Signo + Jimnie cap in the back
-
Date: Sat, Jan 7 2012 04:33:08
FrogPrinceXD wrote: Hence this mod haz a very weird weight distribution to it... Frog~
Have that being said, this mod has little momentum. The weight is distributed evenly throughout the whole mod. -
Date: Sat, Jan 7 2012 06:21:11
That sucks. :/ Was thinking of making one. Oh well, thanks guys.
-
Date: Fri, Jan 13 2012 11:49:01
erm...the backcap insert?
-
Date: Fri, Jan 13 2012 19:26:42
U need the insert?
-
Date: Fri, Jan 13 2012 20:08:26
Lol how has the Seven G3 no momentum? IMO it has more than Ballsign or metallic ComSsa and it spinning it feels awesome.
-
Date: Sat, Jan 14 2012 01:59:22
Cytriik wrote: U need the insert?
i need the BACKCAP insert -
Date: Sat, Jan 14 2012 03:15:45
ummm... so you need the insert? its the same insert.
-
Date: Sat, Jan 14 2012 12:06:32
The weight distribution doesnt matter that much, i built many versions with same stats but different grips and i got 2spinners who live where i used to live to try it and they couldnt tell the difference, gave them 4xseven mod and the both picked the wrong one at first turn then one picked the right one at second try, thats below average:) the only reason to do it like seven did is that this arrangement (using "rare" needlepoint) is the most stable one, if u want it as stable with signo, noname plastic tips and stuff u need to add a little bit more weight (like 0,4g) to the mod.
-
Date: Mon, Jul 7 2014 15:57:22
What should I do to balance it if i'm using a signo tip? or a g3 tip?
-
Date: Mon, Jul 7 2014 21:16:59
Depending on which side is lighter you can add more grip inside the hyperjell grip in the cap or add something like patafix between the tips. Sometimes even using a little bit of tape at the tips/under the caps can even it out. ;)