UPSB v4

Tutorials Pending Approval / SC OTVM 1000

  1. Oleg5000000
    Date: Fri, Oct 22 2010 22:09:25

    SC otvm 1000 - - - - - - - - - - - - - - - - - - This is the first mod that I made, and in my opinion is a great pen to use. - - - - - - - - - - - - - - - - - - - - - - - - Statistics: Otvm 1000 Cog: center balanced Weight: 13.5 grams (depending on ink you use) Style: single sided Writing mechanism: non-retractable Ink type: any (your choice. I used ball-point) Estimated cost: about 5$ - - - - - - - - - - - - - - - - - - - - - - - - - MATERIALS LIST Pens needed: (1) pentel wow! bk440 (grip, can be replaced) (1) corner office liquid ink (cap) (1) marker (not sure what it is, look at pics. a BIC roundstic has to tightly fit in it) (1) pen tip that can fit onto front of marker (1) BIC roundstic pen (1) G2 (grip) - - - - - - - - - - - - - - - - - - - - - - - - - -

    Spoiler Step 1: gather materials to make the marker, take everything out and wash it. then cut it as shown to make the roundstic part, cut the roundstic about three centimeters down to get the two parts the two ink tubes are both optional, and are of your choice. i dont know which pens i took them from the pen tip just has to fit onto the end of the marker, or you can find a way to attach it the corner office pen cap has to be cut by a saw, unless you want to leave it the way it is my marker already has the long part of the bic tube inside, because i couldn't get it out Step 2: insert long bic part into the marker tube and insert the shorter part of the bic into the other side Step 3: put the pen tip onto the part of the marker that you cut off Step 4: put the G2 grip on the long part of the bic (sticking out of the marker) and a cut pentel bk440 grip onto the other side Step 5: put the cap on the G2 grip (if its too difficult, you can try to wet it, or spin it on) Step 6: put your pen ink tubes inside it and attach the front on Step 7: put the last grip on the front optional: you could put a ring on the front of it between the two grips
    tell me what you think. i might be selling it Edit: the tip is from the papermate WI-611BP gt and the marker is probably a supertip

  2. PenwisH
    Date: Fri, Oct 22 2010 22:15:04

    Congratulations on your first mod. Typically, Please post pictures in show off your pen section before posting a tutorial. Typically tutorials are requested once a mod has gained popularity/traction.

  3. Oleg5000000
    Date: Fri, Oct 22 2010 22:24:50

    yeah, but i looked at that section, and usually people just post their pens, and not many people comment on them. its just pics. one after the other, and no feedback. so should i leave it?

  4. SuiXidaL
    Date: Fri, Oct 22 2010 22:40:06

    Good mod, just that the parts are kinda....not available everywhere like it uses random parts from pens that we've never heard before :P Besides the g2, bic etc. Good job.

  5. Holypie
    Date: Fri, Oct 22 2010 22:55:32

    Yeah, availability of parts is low, unless we can find out what the mysterious tip and marker are.

  6. Oleg5000000
    Date: Fri, Oct 22 2010 23:16:05

    the tip is actually from the papermate WI-611BP gt, i just found out and im pretty sure that the marker is a supertip

  7. Nachoaddict
    Date: Sat, Oct 23 2010 01:25:41

    That's because the thread is cleaned every so often and posts without pictures are often deleted.

  8. Oleg5000000
    Date: Sat, Oct 23 2010 02:52:23

    Nachoaddict wrote: That's because the thread is cleaned every so often and posts without pictures are often deleted.
    what are you talking about?

  9. Nachoaddict
    Date: Sat, Oct 23 2010 04:26:13

    Look at the first post of Show off your pens =.=

  10. +Guitrum+
    Date: Sat, Oct 23 2010 04:47:36

    does anyone read the rules when they join?

  11. Twine
    Date: Sat, Oct 23 2010 04:56:48

    Wow, that's smashes my 1st mod wayyyy out of the water. Good Job :)

  12. Oleg5000000
    Date: Sat, Oct 23 2010 14:03:38

    Nachoaddict;30258]Look at the first post of Show off your pens =.=[/QUOTE] oh, i see now. [QUOTE=+Guitrum+ wrote: does anyone read the rules when they join?
    yeah, i did read it, but i didnt really pay attention to that part. but thanks anyways

  13. buhryan
    Date: Wed, Oct 27 2010 04:47:17

    is the ink always out like that?

  14. Oleg5000000
    Date: Wed, Oct 27 2010 20:11:24

    buhryan wrote: is the ink always out like that?
    yeah, but i made a retractable version of it