UPSB v4
Tutorials Pending Approval / Waterfall Mod Retractable
-
Date: Thu, Sep 6 2012 19:30:21
Hi. Some people asked me how to make Waterfall mod retractable (on youtube). Here is a tutorial for this mod. You know, it's not the only and the best way to make that. So, let's go. In first, a little pic : Weigth : ~ 16g Height : As a normal Waterfall mod Type : Retractable COP ~= COG You need :
Tuto : First cap : You need use your circular file to make that. Second cap : Drill this cap with knife. The spring and the inktube should be able to slide easily.Spoiler
Pens: - 1 Waterfall mod (All) - 1 Bic round stic rt (System rt) - 1 HGG (Inktube) - 1 RSVP (Inktube) - 1 Spring ( ~ 2 cm) Others: - Scotch / Chatterton - Glue - Knife - Circular file ( if you do not have this tool, you can drop the tutorial..)Then, put a signo tip on R094 cap (second cap) with glue. Take your bic round stic rt and cut the clip :Spoiler
Depending on the size of your spring, take your RSVP inktube and put a piece of tape (about 2.3 cm from the tip) :Spoiler
Take the retractable system of your Bic and glue it in the end superpirat the finest (yes, superpirat has an side less wide than the other, which you see)Spoiler
Push the spring and inktube into Superpirat body and put the cap on the body :Spoiler
Spoiler
Cut about 2.6 cm from the inktube of your HGG, tape it on the button clicker, but not too much otherwise the system can not walk and glue your signo tip over (or with patafix, or teflon, search a solution to attach the tip on the button) :Spoiler
Here, we will see if you have filed down the inside of R094 cap remaining. Simply add the last cap on the ass of your mod, if the signo tip is hard to pass is that you have not filed down enough inside the cap:Spoiler
Yeah, it's very uggly i know D:Put grips on caps. /Optional/ If you find your mod makes too much noise when you spin, add a bit of cotton around the rsvp inktube and back of the mod (the level of hgg inktube) Video : [video=youtube;f3jERe0XB-Y]http://www.youtube.com/watch?v=f3jERe0XB-Y&feature=player_embedded[/video] If you have any questions, don't hesitate.Spoiler
-
Date: Thu, Sep 6 2012 21:12:37
oh i remember this tut. That brings up a quarrel. nice tut anyway
-
Date: Thu, Sep 6 2012 22:45:43
Awesome tutorial! I'm trying to make this mod, can I replace the HGG inktube with a signo DX inktube? EDIT: I just tried out this way of doing it (just the rsvp inktube and retract system) and found that the RSVP inktube is too long. Did you have this problem?
-
Date: Thu, Sep 6 2012 23:41:02
you can just cut off part of it
-
Date: Fri, Sep 7 2012 08:52:01
Danny 116 has made a tutorial on this already though it doesn't have pic Good tut anyways :) http://forum.upsb.info/showthread.php?t=6274
-
Date: Fri, Sep 7 2012 10:26:51
Firepython99 wrote: Awesome tutorial! I'm trying to make this mod, can I replace the HGG inktube with a signo DX inktube? EDIT: I just tried out this way of doing it (just the rsvp inktube and retract system) and found that the RSVP inktube is too long. Did you have this problem?
If you can attach the signo dx inktube on the button of retractability, yes why not. You can take a SuperbG intkube instead of RSVP inktube And i'm sorry, i didn't know there was already one (tut of this mod)... -
Date: Fri, Sep 7 2012 10:40:46
thx bro u help me alot
-
Date: Fri, Sep 7 2012 16:00:58
yeye! simpler then mine >.<" but pretty much the same :) thanks the inspiration!
