UPSB v4

Tutorials Pending Approval / G2 FRIXROND by Aceron

1. Aceron

   Date: Tue, Sep 4 2012 14:34:55

   Hi, today I'm gonna show you how to make my 2nd mod (3rd, actually) It's a single cap : the G2 frixrond (frixion + aceron = frixrond)

   Spoiler

   
   TUT: You need : - 1 super lavable ( body ) - 1 frixion v6 from pilot ( caps ) - 1 G2 pilot ( a front part ,a grip and a clip ) - 2 flexgrips ultra ( 2 tips )
   Spoiler

   
   here is the clip :
   Spoiler

   
   1) cut your superlavable body like this :
   Spoiler

   
   cut at the first stray (or push on the back with a stick)
   Spoiler

   
   2) Cut your g2 tips on the front part like this :
   Spoiler

   
   then cut to 4mm
   Spoiler

   
   3) cut the half of the screw thread
   Spoiler

   
   then lime, it must be straight
   Spoiler

   
   4) then put the body and the front part of g2 together (the side with the little stray on the superlavable)
   Spoiler

   
   5) put the clip like this and lime the part who gets out.
   Spoiler

   
   put the tips in the limed part pf the clip
   Spoiler

   
   then the grip.....
   Spoiler

   
   6) put some electrical tape on the frixion cap
   Spoiler

   
   7) insert and tips in the body
   Spoiler

   
   8) put some electrical tape or scotch on the cap so it can be hold
   Spoiler

   
   9) put some electrical tape (again!) on the mod
   Spoiler

   
   YOU HAVE THE G2 FRIXROND MOD !

2. ItsNick

   Date: Tue, Sep 4 2012 15:17:16

   looks nice thou.. but the cap looks crappy ^_^ nice job ;)