UPSB v4

Approved Tutorials / Nightz DC Mod

  1. Nightz
    Date: Mon, May 21 2012 15:04:07

    Hi Nightz here and this is my first Pen Mod Tutorial :D. This Mod Is Called Nightz DC Mod It is very heavy and has a lot of momentum. I am very proud of this mod. :D COG: COP Length: 20cm (shorter or longer depends on modder) Weight: approx. 16-18 grams Style: Double-Sided Writing-Mechanism: no ink Estimated-Cost: approx. Very ex like 20-30 bucks if u buy whole pens to make this but cheaper if u use spare parts. =========================== Materials Needed: 4x Uniball Signo ( The kind with metal tips) 2x Rikota Highlighters 1x Comssa 4x G2 ( For grips only you can sub) 4x White Hoops from penwish (or u can use white tape or somse white grips) =========================== Instructions: [SIZE="5"]1. Take both your Rikota Highlighters and pull off this part Shot at 2012-05-21 2. Cut the Rikota Highlighters like this. (Accuracy here is not important, but dont overcut.) Shot at 2012-05-21 2. Take 2 Uniball Signo caps and break off this part Shot at 2012-05-21 3. Use a chopstick and push through. This is very difficult. You can take a plier and grip the blue part and loosen it by wiggling it and twisting it.Then put the chopstick in and then grip the cap hard then slammed it on the table. Shot at 2012-05-21 4. Take 2 Uniball Signo Tips and push them into the Uniball Signo caps like this. Shot at 2012-05-21 5. Wrap Teflon Tape on the end of another 2 Uniball Signo Tips. Shot at 2012-05-21 6. Push them into the caps. Shot at 2012-05-21 7. Take your comssa and pull off the backplug, take out the ink and cut off the other end of the comssa. Then take scissors and put it through both ends of the comssa barrel and rotate many times to file it thinner. Shot at 2012-05-21 8. Attach the Rikota part you cut out. Shot at 2012-05-21 9. Wrap Tefon Tape Around it. Shot at 2012-05-21 10. Put on the grips and hoops like this. (In this pic i forgot to wrap teflon tape around the rikota backplug thing, but your supposed to.) Shot at 2012-05-21 11.Then Attach. Remember to leave a little grip on the comssa body. ( In this pic i forgot to wrap teflon tape on the rikota backplug thing. But ur supposed to. ) Shot at 2012-05-21[/SIZE] [SIZE="6"][SIZE="5"]Finished Product [/SIZE][/SIZE] =========================== I'll make a video tutorial for this when i get the parts again so that i can make this agn. =========================== Q&A Q.The Rikota part i cut out dosent fit into the comssa barrel. A. File the inside of the comssa barrel until it fits

  2. mapjay
    Date: Mon, May 21 2012 15:26:31

    It is very heavy and therefore has a lot of momentum. this statement is invalid XD

  3. Nightz
    Date: Mon, May 21 2012 15:34:32

    oops :( what should i have put?

  4. Wikero
    Date: Mon, May 21 2012 16:30:45

    nice mod dude I like it :)

  5. Zeta
    Date: Mon, May 21 2012 16:52:46

    Wow, nice pen to reuse rikota's "tip".

  6. entertdr
    Date: Mon, May 21 2012 17:12:49

    mmmmmmmmmmmmmmmmmmmmmm

  7. DArKT
    Date: Mon, May 21 2012 17:31:36

    looks nice ;)

  8. lolfus
    Date: Mon, May 21 2012 18:21:16

    wtf this pen looks very heavy... When i mod it, id use two plastic tips looking like signo. makes it cheaper and lighter.

  9. mot
    Date: Mon, May 21 2012 18:50:37

    Zeta wrote: Wow, nice pen to reuse rikota's "tip".
    backplug. can you make a video for the TE ? i'm septic about it ^^'

  10. Masahiro[FPSB]
    Date: Mon, May 21 2012 20:05:23

    Good job ^^

  11. padrace
    Date: Mon, May 21 2012 20:09:59

    @mapjay don't get on his case. Heavier pens will have more momentum usually because the weight is nearer to the ends of the pen. Very rarely would a pen have weight centralized in the middle.

  12. Colbyy
    Date: Mon, May 21 2012 23:02:41

    Nice job Nightz :D

  13. ZappyJ^
    Date: Tue, May 22 2012 00:26:42

    nice modXD good tutorial

  14. TristanxTan
    Date: Tue, May 22 2012 01:09:54

    Nice mod! Would you mind making a video tutorial though? I would not want to mess things up.

  15. Nightz
    Date: Tue, May 22 2012 02:20:50

    Dont worry its hard to mess this mod up. i will be making a video tutorial soon. :D

  16. Zeta
    Date: Tue, May 22 2012 16:33:33

    mot wrote: backplug. can you make a video for the TE ? i'm septic about it ^^'
    It looks much like a tip than a backplug, it's like Emboss "tip". But you may be right

  17. LongCK
    Date: Fri, May 25 2012 23:16:42

    awesome, I will try to make one :)

  18. Nightz
    Date: Thu, May 31 2012 14:57:52

    damn my comssa body got scratched up now it look horrible :(

  19. BeyondEminence
    Date: Sat, Jun 2 2012 13:39:16

    Where can you some Rikota highlighters? The mod is AMAZING looking And i would love to make it.

  20. mapjay
    Date: Sat, Jun 2 2012 13:47:00

    @BeyondEminence any daiso

  21. Soren
    Date: Sat, Jun 2 2012 15:54:26

    Out of all the tutorials they choose to approve this tutorial...

  22. rshade227
    Date: Sat, Jul 14 2012 14:41:53

    cool mod maybe I will make one

  23. killer bonanza
    Date: Sun, Jul 29 2012 14:45:28

    Where to get the rikota's?

  24. Apocalyptic Shadows
    Date: Sun, Jul 29 2012 15:05:54

    killer bonanza wrote: Where to get the rikota's?
    Daiso apparently.

  25. juggalo666666
    Date: Mon, Jul 30 2012 21:21:54

    What about that tutorial vid?

  26. Accuru
    Date: Mon, Jul 30 2012 23:04:20

    nice looking mod u got there i might wanna try it out later when i have a chance

  27. killer bonanza
    Date: Wed, Aug 8 2012 14:51:42

    And where to get Teflon tape ? I cant seem to find them in sg

  28. Nightz
    Date: Tue, Aug 21 2012 14:11:46

    hardware stores usually sell them

  29. Ethanhunt
    Date: Fri, Sep 14 2012 07:00:49

    Good thinking though it might be bit heavy.

  30. Tommy
    Date: Wed, Apr 3 2013 09:41:53

    really cool looking, reminds me of an LED mod