UPSB v4
Pen Modifications / Froggy's Modding Tutorials (w/ Crappy Engrish Speaking Skeelz)
-
Date: Thu, Apr 26 2012 09:05:10
I'm locking this because I won't be uploading anymore eps soon. I'll still do this thou, just with new setups and stuffs once I got everything set up. Frog~
[spoiler="Inserts"]Making seamless Inserts with HD wallpapers: http://www.youtube.com/watch?v=8nLAAUZ48c8 Making stylish inserts: http://www.youtube.com/watch?v=hHmLqH-wjzI Rolling inserts: http://www.youtube.com/watch?v=jfm10us49Ok Finding insert dimension: http://www.youtube.com/watch?v=1yAEBuyBB1Y [/spoiler] [spoiler="Grip cutting"]Cutting pre-marked grips: http://www.youtube.com/watch?v=-L0ZCrS3bAY [/spoiler] I will make more tutorials based on suggestion: - Tape CutSpoiler
Playlist: http://www.youtube.com/playlist?list=PLFA702C89B0ECF3A7
[spoiler="Barrel Cutting"][B]Barrel cutting, for harder-type plastic:[/B] http://www.youtube.com/watch?v=6Eo7yzznUgQ [B]Barrel cutting, for softer-type plastic:[/B] http://www.youtube.com/watch?v=HhaLtSwgxFk [B]Barrel cutting, for wooden barrel:[/B] http://www.youtube.com/watch?v=Tx1bisBmp-U- Grip Cut- Cap Cut (Clipped and Slanted) Frog~ edit: Next week is grip wasting week~[/spoiler] -
Date: Thu, Apr 26 2012 10:07:57
i approve of these tutorials :thumb:
-
Date: Thu, Apr 26 2012 10:28:20
i.suk wrote: i approve of these tutorials :thumb:
So do I!~ Thanks froggy! -
Date: Thu, Apr 26 2012 18:51:26
Tapecuting and gripcuting maybe? only straight cuts, not complicated ones (it took me some time to guess how it was, so it's not that obvious lol)
-
Date: Fri, Apr 27 2012 03:54:52
Uploaded two more videos on barrel cutting. Give me more suggestions on what you want me to make tut on =3 Frog~
-
Date: Fri, Apr 27 2012 04:01:34
i tried making a thread like this once. the mods took it down...
-
Date: Fri, Apr 27 2012 04:06:48
I'll clarify with the mods then, ty for letting me know ^_^ Frog~
+Guitrum+ wrote: i tried making a thread like this once. the mods took it down...
-
Date: Fri, Apr 27 2012 04:27:14
Pro Modder+Pro tutorials=happy me.
-
Date: Fri, Apr 27 2012 04:36:03
Could you turn adjust the volume to make it a bit louder? I had to turn up my computer volume and youtube volume to max to hear well >< Maybe it's just my comp not sure haha
-
Date: Fri, Apr 27 2012 04:39:47
You know any programs that can amplify volume in a video? The low volume is cuz I'm using default laptop's mic :( Frog~
Nachoaddict wrote: Could you turn adjust the volume to make it a bit louder? I had to turn up my computer volume and youtube volume to max to hear well >< Maybe it's just my comp not sure haha
-
Date: Fri, Apr 27 2012 06:23:49
Should be able to amplify it with WMM or most other video editing programs.
-
Date: Fri, Apr 27 2012 06:37:46
Froggy . Teach how to design grip cutting the edge . I can cut straight nicely but edge . Freaking bad
-
Date: Fri, Apr 27 2012 07:03:20
But I use WLMM.. I briefly tried finding the function for amplifying volume but no hope :( Well for the vids I just upload them raw after converting them from avi to wmv. Frog~
Nachoaddict wrote: Should be able to amplify it with WMM or most other video editing programs.
-
Date: Fri, Apr 27 2012 14:49:22
how to cut area that's not straight i mean like the curve side of g3 cap. the top part. orlike rsvp cap how you cut the top?
-
Date: Mon, Apr 30 2012 07:42:25
this week I will be making videos about inserts. later this week, there will be vids on making inserts similar to Seven G3's one, then complete it with how to correctly roll the insert. Frog~
-
Date: Mon, Apr 30 2012 08:08:48
Nice. I like this thread. :DD
-
Date: Mon, Apr 30 2012 09:18:09
You could have selected the crop tool, enter the insert dimensions, set the boundary box properly and press enter instead of transforming the image and pasting it into a new document. Same goes for printing, you can do it directly from photoshop: Just preview the print, move the insert away from the centre and print that thing. No Word needed for that simple task.
-
Date: Mon, Apr 30 2012 09:55:34
I dont print from photoshop because sometimes (specially when i got the insert from the web), it prints out extra large inserts Word is just something I always use to make sure the size is correct. And yeah, that's how I make inserts ;) I'm sure there are lots more different methods xD Frog~
webspider wrote: You could have selected the crop tool, enter the insert dimensions, set the boundary box properly and press enter instead of transforming the image and pasting it into a new document. Same goes for printing, you can do it directly from photoshop: Just preview the print, move the insert away from the centre and print that thing. No Word needed for that simple task.
-
Date: Mon, Apr 30 2012 10:04:02
If Photoshop prints the inserts at the wrong size, then you haven't chosen the correct DPI. And yes, as you can probably imagine, it's no problem fixing that afterwards in the printing preview as well. So I don't really get why you choose to avoid it. There may be a lot of ways to do things, but why don't you present people the most straightforward way?
-
Date: Mon, Apr 30 2012 10:20:12
There may be a lot of ways to do things, but I'm showing people how I do it. How I do it, may not be the most straightforward way. Frog~
webspider wrote: If Photoshop prints the inserts at the wrong size, then you haven't chosen the correct DPI. And yes, as you can probably imagine, it's no problem fixing that afterwards in the printing preview as well. So I don't really get why you choose to avoid it. There may be a lot of ways to do things, but why don't you present people the most straightforward way?
-
Date: Thu, May 10 2012 07:00:06
updated playlist with 2 more videos about inserts. What should I make tuts on next? Frog~
-
Date: Thu, May 10 2012 07:08:48
photography
-
Date: Thu, May 10 2012 08:04:45
Hmm, I did one on that in the GPC (and this is more of a thing that would be better presented in a text tutorial with the focus set on shooting the photo, not editing it endlessly). Maybe you could add a note on how to find out the size for an insert by trial and error (especially important for unknown pens or people who want to make them perfectly seamless).
-
Date: Fri, May 11 2012 13:07:33
updated with 2 vids: one requested by webspider - finding insert dimensions one is for grip cutting week~ Frog~
-
Date: Tue, Jun 19 2012 10:00:31
Froggy wrote: updated with 2 vids: one requested by webspider - finding insert dimensions one is for grip cutting week~ Frog~
Suggestion!! taking out the reporter grip design grip ... -
Date: Tue, Jun 19 2012 10:32:21
Nice, I like this kind of modding tutorial set out. It teachers you the basics of modding. I would like it if you did a tut on outserts. =3