UPSB v4

Tutorials Pending Approval / Nomnom DC mod tutorial

  1. nomnom64
    Date: Tue, Apr 10 2012 21:56:42

    Nomnom DC =========================== Stats: =========================== Nomnom DC COG: COP Length: 21 cm Weight: Waterfall 2. Cut the clip off of the cap and sand it down so it is uniform with the rest of the cap. 3. Shove both tips in each cap. Make sure that the regular signo tip goes in first. 4. Cut the airfit grip in half and put each piece on each cap. 5. Double cap the comssa body and you are done. [/SPOILER] =========================== Q/A: Q: My cap is too loose! A: When in doubt, more tape. Q: Where can I get the caps? A: Most schools in the US use them as overhead markers. If you can't find any at school, try an office supply store. ===========================

  2. Froggy
    Date: Tue, Apr 10 2012 22:39:18

    There's this sharpie marker that looks similar to this unknown marker u used. potential sub? maybe.. Just for your future reference :P Frog~

  3. Fuse
    Date: Tue, Apr 10 2012 23:14:15

    May not look the best, but it spins amazingly. I helped make this tutorial.

  4. petersleepy
    Date: Wed, Apr 11 2012 00:22:47

    Fuse wrote: May not look the best, but it spins amazingly. I helped make this tutorial.
    Way to take the credit :P

  5. petersleepy
    Date: Wed, Apr 11 2012 00:24:20

    Froggy wrote: There's this sharpie marker that looks similar to this unknown marker u used. potential sub? maybe.. Just for your future reference :P Frog~
    actually, this is the marker that teachers use to write on overheads...at least that's what it's like at our school...

  6. Fuse
    Date: Wed, Apr 11 2012 00:49:30

    Peter, just a hint, don't double post, mods don't like it. I wrote the tutorial, Tom/nomnom64 made the mod.

  7. Buum'Gemini
    Date: Fri, Apr 13 2012 05:59:39

    Pretty nice mod.... I think.....Body comssa is not smooth compared with SPT T.Tthanks for tut

  8. Danny116
    Date: Fri, Apr 13 2012 18:34:35

    @Bumm'Gemini Commsa they are both smooth o-o, you mean the feel of the plastic? the idea is great! but the caps look weird imo and airfit grip isnt my fav :/

  9. Ceru Seiyu
    Date: Fri, Apr 13 2012 21:57:29

    I'd recommend not posting mod tutorials unless people request them, because to be honest it's not really that good looking.

  10. Rudra
    Date: Fri, Apr 13 2012 23:24:57

    @Fuse My yellow version of the mod. Very nice mod.

  11. Fuse
    Date: Fri, Apr 13 2012 23:33:18

    @Penz3160 what materials did you use?

  12. Rudra
    Date: Fri, Apr 13 2012 23:36:01

    Fuse wrote: @Penz3160 what materials did you use?
    Variated a little. s360, bic brite liner caps.

  13. Ceru Seiyu
    Date: Fri, Apr 13 2012 23:37:42

    Penz3160 wrote: @Fuse My yellow version of the mod. Very nice mod.http://i.imgur.com/gV2eK.jpg
    That doesn't look like the mod at all, you've used a different body, different caps, the tips are on the outside and the only similarity is the tips.

  14. Rudra
    Date: Fri, Apr 13 2012 23:41:02

    Oh just now noticed those aren't tips. They are points of the cap. Must have made my own mod then. Sorry!